Menu Close

Showing all 13 results

  • $20.00

    7 different types of small boxes – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE1 Average box size: 100x100x40 mm for material’s thickness 4mm

    SIZE2 Average box size: 75x750x30 mm for material’s thickness 3mm

    If you need other sizes of boxes – please write to us, for a small fee we will make a box design of any size

    Colors of vectors:
    green – areal laser engraving
    red – line laser engraving (laser cutting with minimal power and high speed)
    black – laser cutting

    Video review: https://www.youtube.com/watch?v=c3-RTSp-KZY&t=19s

  • $5.00

    Animal figures for coloring 10 units – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    Approximate figure size: 5-12 cm

  • $10.00

    Christmas tree display – files arhiv for use by the CNC laser or router machine.
    The display is assembled and disassembled WITHOUT GLUE. Compactly folded and transferred – especially relevant for holiday sales and Christmas markets. It can also simply decorate the room. Now you can put gifts not only under the tree, but on the tree too 🙂

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with SIZE which are shown in the picture above.
    All SIZES are correct for 6mm material thickness (slot width 6,2mm). If you are using 3mm plywood, then just reduce the scale of the plan by 50%. But remember that the size of the finished product will decrease by 50% too.

    The maximum size of the largest detail – 700*667mm

  • $10.00

    Village + torch for LED-candles (4 houses + 1 torch + 3 street lights + 1fir-tree) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with the APPROXIMATE SIZE of the houses – 7-10cm for the thickness of the material used is 4mm. Or 5-8 cm if you use a 3mm thick material. Candle diameter – 36,8mm.

  • $10.00

    Christmas houses for LED-candles (5 pieces) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with the APPROXIMATE SIZE of the houses – 7cm for the thickness of the material used is 4mm. Or 5 cm if you use a 3mm thick material. Candle diameter – 36,8mm.

  • plywood little houseslittle christmas houses
    $20.00

    Little Christmas houses (6 pieces) – files arhiv for use by the laser machine.

    Black color – for cutting
    Red color – linear engraving (weak laser power and high speed)

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with the APPROXIMATE SIZE of the houses – 4-5cm for the thickness of the material used is 4mm. Or 3-4 cm if you use a 3mm thick material.

  • $15.00

    Map Game of Thrones – files arhiv for use by the laser machine.

    The map is made on the basis of various cartographic materials found on the Internet. The file does not copy any of the found maps images, but has its own original design.

     

  • $10.00

    Numbers on the stand from 1 to 30 – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    Approximate size in height: 10-13,5 inch for material thickness 1/8 (3.17 mm) and 1/4 inch (6.35 mm)

  • $10.00

    Valentine’s candle box set1 (3 units) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    Material’s thickness 4mm:
    87 / 143 H (without / with cap) x 92 W x 92 L mm

    Material’s thickness 3mm:
    87 / 142 H (without / with cap) x 92 W x 92 L mm

  • $10.00

    Valentine’s candle box set2 (3 units) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    Material’s thickness 4mm:
    87 / 143 H (without / with cap) x 92 W x 92 L mm

    Material’s thickness 3mm:
    87 / 142 H (without / with cap) x 92 W x 92 L mm

  • $10.00

    Wooden Christmas-tree decorations – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    Jewelry size: 8 cm max

    Box size: 26,4 H x 26,4 W x 3,4 L cm – Material’s thickness: 4mm

  • $10.00

    Wooden Christmas-tree decorations (Part2) – files arhiv for use by the laser machine.

    Black color – for cutting
    Red color – linear engraving (weak laser power and high speed)
    Green color – area engraving + linear engraving

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE 1:
    Box size: 37 H x 328 W x 332 L cm – Material’s thickness: 4mm. Jewelry size: 97 mm max

    SIZE 2:
    Box size: 29 H x 255 W x 258 L mm – Material’s thickness: 3mm. Jewelry size: 75 mm max

  • $20.00

    Wooden Christmas-tree decorations (Part3) – files arhiv for use by the laser machine.

    10 main internal drawings + 4 different frames. Total 40 different options for toys

    Black color – for cutting
    Red color – linear engraving (weak laser power and high speed)

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    The approximate size of the toys is about 110mm. The size is easy to change by scaling.