Menu Close

Showing all 30 results

  • $5.00

    Box House – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE1:
    200 H x 144 W x 137 L mm – Material’s thickness: 4mm
    Maximum dimensions of a biggest detail: 224 x 137 mm.

    SIZE2:
    150 H x 108 W x 103 L mm – Material’s thickness: 3mm
    Maximum dimensions of a biggest detail: 168 x 103 mm.

  • $0.00

    Candlestick Angel – files arhiv for use by the laser machine

  • $15.00

    Christmas advent truck – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE SIZE:

    SIZE 1 : 126 H x 419 W x 95 L mm – Material’s thickness: 3 mm
    Maximum dimensions of a biggest detail: 300 x 83 mm

    SIZE 2: 168 H x 558 W x 126 L mm – Material’s thickness: 4 mm
    Maximum dimensions of a biggest detail: 400 x 110 mm

    SIZE 3 : 252 H x 838 W x 190 L mm – Material’s thickness: 6 mm
    Maximum dimensions of a biggest detail: 600 x 166 mm

    Size shown for truck with trailer

  • $20.00

    Christmas hangle (5 versions) – files arhiv for use by the laser machine.
    Inside the file there are 5 versions + 1 version differing only in the inscription. Additional version made for easy personalization – adding an inscription, name, etc.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE 1: 143 H x 297 W x 35 L mm – Material’s thickness: 3 mm
    Maximum dimensions of a biggest detail: 297 x 143 mm

    SIZE 2: 190 H x 396 W x 46 L mm – Material’s thickness: 4 mm
    Maximum dimensions of a biggest detail: 396 x 190 mm

    SIZE 3: 285 H x 594 W x 66 L mm – Material’s thickness: 4 mm
    Maximum dimensions of a biggest detail: 285 x 594 mm

    SIZE 4: 380 H x 792 W x 88 L mm – Material’s thickness: 4 mm
    Maximum dimensions of a biggest detail: 380 x 792 mm

  • $25.00

    Christmas Lightbox set1 (3 pieces) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    For Material’s thickness: 4mm
    SIZE 1: 220x220x69mm
    SIZE 2: 207x207x63mm (can be used on a K-40 laser with A4 bed size)

    For Material’s thickness: 3mm
    SIZE 1: 220x220x67mm
    SIZE 2: 207x207x63mm (can be used on a K-40 laser with A4 bed size)

    For the backlight, I used the simplest 1m LED-stripe with battery box and remote control.

  • $25.00

    Christmas Lightbox set2 (3 pieces) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    For Material’s thickness: 4mm
    SIZE 1: 220x220x69mm
    SIZE 2: 207x207x63mm (can be used on a K-40 laser with A4 bed size)

    For Material’s thickness: 3mm
    SIZE 1: 220x220x67mm
    SIZE 2: 207x207x63mm (can be used on a K-40 laser with A4 bed size)

    For the backlight, I used the simplest 1m LED-stripe with battery box and remote control.

  • $10.00

    Christmas Mitten – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE1:
    50 H x 179 W x 241 L mm – Material’s thickness: 3mm
    Maximum dimensions of a biggest detail: 241 x 179 mm. Longest detail: 50 x 268 mm.

    SIZE2:
    67 H x 239 W x 321 L mm – Material’s thickness: 4mm
    Maximum dimensions of a biggest detail: 321 x 239 mm. Longest detail: 67 x 357 mm.

  • Christmas scene
    $15.00

    Christmas scene – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE 1: 191 H x  W67 x 165L mm – Material’s thickness: 3mm
    SIZE 2: 254 H x  W90 x 220L mm – Material’s thickness: 4mm

  • $13.00

    Christmas scene – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE 1: 318 H x 517 W x 160 L mm – Material’s thickness: 3 mm
    Maximum dimensions of a biggest detail: 471 x 318 mm and 517 x 295 mm

    SIZE 2: 424 H x 689 W x 213 L mm – Material’s thickness: 4 mm
    Maximum dimensions of a biggest detail: 627 x 424 mm and 689 x 393 mm

  • $10.00

    Christmas Sock – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE1:
    290 H x 159 W x 50 L mm – Material’s thickness: 3mm
    Maximum dimensions of a biggest detail: 290 x 159 mm.

    SIZE2:
    386 H x 212 W x 67 L mm – Material’s thickness: 4mm
    Maximum dimensions of a biggest detail: 386 x 212 mm.

  • $30.00

    Christmas stars – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE 1: 225mm – Material’s thickness: 3mm
    SIZE 2: 300mm – Material’s thickness: 4mm

    For the backlight, I used the simplest light garland with battery box.

  • $15.00

    Christmas stars (pack 6 pieces) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE 1: 225mm – Material’s thickness: 3mm
    SIZE 2: 300mm – Material’s thickness: 4mm

    For the backlight, I used the simplest light garland with battery box.

  • $20.00

    Christmas stars (pack 8 pieces) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE 1: 225mm – Material’s thickness: 3mm
    SIZE 2: 300mm – Material’s thickness: 4mm

    For the backlight, I used the simplest light garland with battery box.

  • $20.00

    Christmas tree – Advent calendar – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE1:
    240 H x 267 W x 195 L mm – Material’s thickness: 3mm
    Maximum dimensions of a biggest detail: 267 x 350 mm

    SIZE2:
    319 H x 355 W x 260 L mm – Material’s thickness: 4mm
    Maximum dimensions of a biggest detail: 355 x 465 mm

    Colors of vectors:
    green – areal laser engraving
    red – line laser engraving (laser cutting with minimal power and high speed)
    black – laser cutting

  • $10.00

    Christmas tree display – files arhiv for use by the CNC laser or router machine.
    The display is assembled and disassembled WITHOUT GLUE. Compactly folded and transferred – especially relevant for holiday sales and Christmas markets. It can also simply decorate the room. Now you can put gifts not only under the tree, but on the tree too 🙂

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with SIZE which are shown in the picture above.
    All SIZES are correct for 6mm material thickness (slot width 6,2mm). If you are using 3mm plywood, then just reduce the scale of the plan by 50%. But remember that the size of the finished product will decrease by 50% too.

    The maximum size of the largest detail – 700*667mm

  • $10.00

    Village + torch for LED-candles (4 houses + 1 torch + 3 street lights + 1fir-tree) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with the APPROXIMATE SIZE of the houses – 7-10cm for the thickness of the material used is 4mm. Or 5-8 cm if you use a 3mm thick material. Candle diameter – 36,8mm.

  • $20.00

    Christmas wreath – files arhiv for use by the laser machine.

    BONUS: In addition to the main wreath, we made a file of 5 separate houses. Added a back wall of houses, additional grooves and openings for LED candles. You will see this file in the folder “houses”.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with following SIZE:

    499 H x 488 W x 53 L mm – Material’s thickness: 3 mm
    Maximum dimensions of a biggest detail: 300 x 83 mm or A4 format (special file for a small bed)

    For owners of laser machines with a small bed (for example K40), you can use a special file with a wreath divided into parts (K40 folder inside the archive). Each piece of such a part has a size of less than 297 * 210mm. The cut out parts are fixed like a puzzle and glued together. The outline of the puzzle is located in inconspicuous places, so as not to spoil the design.

  • $5.00

    Fir Tree Box – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE1:
    210 H x 189 W x 55 L mm – Material’s thickness: 3mm

    SIZE2:
    280 H x 252 W x 73 L mm – Material’s thickness: 4mm

  • $10.00

    Fir-tree with lights – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    The second version of the file has 2 drawers instead of a side door.

    SIZE1:
    157 H x 121 W x 124 L mm – Material’s thickness: 3mm
    Maximum dimensions of a biggest detail: 226 x 121 mm

    SIZE2:
    209 H x 161 W x 165 L mm – Material’s thickness: 4mm
    Maximum dimensions of a biggest detail: 161 x 300 mm

    Colors of vectors:
    green – areal laser engraving
    red – line laser engraving (laser cutting with minimal power and high speed)
    black – laser cutting

  • $0.00

    Horse toy – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZE:

    275H x  W90 x 143L mm – Material’s thickness: 6mm

    To use this file for 4mm, reduce the scale of the entire template to 67% instead of 100%
    To use this file for 3mm, reduce the scale of the entire template to 50% instead of 100%

  • $10.00

    Christmas houses for LED-candles (5 pieces) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with the APPROXIMATE SIZE of the houses – 7cm for the thickness of the material used is 4mm. Or 5 cm if you use a 3mm thick material. Candle diameter – 36,8mm.

  • plywood little houseslittle christmas houses
    $20.00

    Little Christmas houses (6 pieces) – files arhiv for use by the laser machine.

    Black color – for cutting
    Red color – linear engraving (weak laser power and high speed)

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with the APPROXIMATE SIZE of the houses – 4-5cm for the thickness of the material used is 4mm. Or 3-4 cm if you use a 3mm thick material.

  • $25.00

    Love Lightbox set1 (3 pieces) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE: 207x207x63 mm
    Material’s thickness: 3mm and 4mm

    For the backlight, I used the simplest 1m LED-stripe with battery box and remote control.

  • $25.00

    Love Lightbox set2 (3 pieces) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE: 207x207x63 mm
    Material’s thickness: 3mm and 4mm

    For the backlight, I used the simplest 1m LED-stripe with battery box and remote control.

  • $0.00

    Snow Lightbox – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    For Material’s thickness: 4mm:
    207x207x63mm (can be used on a K-40 laser with A4 bed size)

    For Material’s thickness: 3mm:
    207x207x63mm (can be used on a K-40 laser with A4 bed size)

    For the backlight, I used the simplest 1m LED-stripe with battery box and remote control.

  • $15.00

    St. Valentine’s Stars (pack 5 pieces) – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE 1: 225mm – Material’s thickness: 3mm
    SIZE 2: 300mm – Material’s thickness: 4mm

    For the backlight, I used the simplest light garland with battery box.

  • $10.00

    Wooden Christmas-tree decorations – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    Jewelry size: 8 cm max

    Box size: 26,4 H x 26,4 W x 3,4 L cm – Material’s thickness: 4mm

  • $10.00

    Wooden Christmas-tree decorations (Part2) – files arhiv for use by the laser machine.

    Black color – for cutting
    Red color – linear engraving (weak laser power and high speed)
    Green color – area engraving + linear engraving

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE 1:
    Box size: 37 H x 328 W x 332 L cm – Material’s thickness: 4mm. Jewelry size: 97 mm max

    SIZE 2:
    Box size: 29 H x 255 W x 258 L mm – Material’s thickness: 3mm. Jewelry size: 75 mm max

  • $20.00

    Wooden Christmas-tree decorations (Part3) – files arhiv for use by the laser machine.

    10 main internal drawings + 4 different frames. Total 40 different options for toys

    Black color – for cutting
    Red color – linear engraving (weak laser power and high speed)

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    The approximate size of the toys is about 110mm. The size is easy to change by scaling.

  • $0.00

    Xmas Eve – files arhiv for use by the laser machine.

    Inside the ZIP file you will find:
    OPTIMIZED files for LASER CUTTING MACHINE with FOLLOWING SIZES:

    SIZE 1:
    92 H x 124 W x 124 L mm – Material’s thickness: 3 mm
    Maximum dimensions of a biggest detail: 124 x 124 mm

    SIZE 2:
    122 H x 165 W x 165 L mm – Material’s thickness: 4 mm
    Maximum dimensions of a biggest detail: 165 x 165 mm